Why Action Camera Helmet Mount Is Necessary?
There are many reasons why an action camera helmet mount is necessary. First, it allows you to capture footage while engaging in activities that would otherwise be impossible to film. This could include anything from mountain biking and skiing to BASE jumping and kitesurfing. Secondly, an action camera helmet mount enables you to get a first-person perspective of the action, which can add a whole new dimension to your videos. Finally, it helps protect your camera from damage while participating in extreme sports.
Our Top Picks For Action Camera Helmet Mount
Action Camera Helmet Mount Guidance
SUREWO Motorcycle Helmet Chin Strap Mount for GoPro Hero 10 or 9 or 8 or 7 or (2018) or 6 or 5 BlackDJI Osmo Action 2Insta360 ONE RAKASO or Campark or YI and More

SUREWO has improved the helmet chin strap. Through design collection and user feedback of the existing chin strap, some improvements have been made to the design. A new double-head adapter has been added to facilitate extended and adjusted shooting angle.
The base mount is integrally formed,it’s stable and hard to crack.Soft rubber gasket on the back is designed with non-slip particles.The gasket and the bottom bracket are integrated into one, which is suitable for most cameras.
The middle part of the gasket adopts a sunken design to highlight the soft glue on the periphery to avoid scratching the helmet.
High-quality elastic strap buckle design, abandon the strap design that is difficult to install, and avoid excessive length straps hitting the skin during high-speed riding and causing pain.
Rounded design. Compared with the old style with sharp corners, this style uses rounded corners to avoid possible safety problems. SUREWO, always thinking about your comfort and safety.
Common Questions on SUREWO Motorcycle Helmet Chin Strap Mount for GoPro Hero 10 or 9 or 8 or 7 or (2018) or 6 or 5 BlackDJI Osmo Action 2Insta360 ONE RAKASO or Campark or YI and More
• What is the best camera to buy for a beginner?The best camera to buy for a beginner is the GoPro Hero 7.
• What is the best mount for a GoPro?
The best mount for a GoPro is the SUREWO Motorcycle Helmet Chin Strap Mount.
• What is the best selfie stick for a GoPro?
The best selfie stick for a GoPro is the Insta360 ONE RAKASO.
• What is the best action camera?
The best action camera is the GoPro Hero 7.
Why We Like This
• 1. Improved helmet chin strap design for extended and adjusted shooting angles• 2. Base mount is integrally formed for stability and durability• 3. Middle part of the gasket is sunken to highlight the soft glue on the periphery and avoid scratching the helmet• 4. High quality elastic strap buckle design for easy installation• 5. Rounded corners for safety
Additional Product Information
Color | Helmet Chin Strap Mount |
Weight | 0.11 Pounds |
WLPREOE 34in1 Motorcycle Helmet Chin Mount Kits for GoPro Hero 10 9 8 7 Black Silver White 6 5 4 Osmo and Other Action Camera with Extra Camera Tethers Mount Bases and Adhesive Pads

If you love to ride motorcycles and also love to take pictures or videos with your action camera, then you need this WLPREOE 34in1 Motorcycle Helmet Chin Mount Kits. It is a great piece of equipment that is very affordable and it comes with everything you need to attach your GoPro camera to your motorcycle helmet. With this helmet chin mount, you can set your GoPro in any placement on your helmet (chin, side or top) to take videos or pictures while riding. It is not strapped onto the helmet, so it will not prevent the visor from closing or block the air inlet on the front of the helmet. The helmet chin mount is made up of four joints that are connected by a screw. Each joint can be rotated 180 degrees, so you can place the camera right where you need it. You can use the J-hook mount with a curved mount to attach it to the helmet or use the flat mount to attach it to ski/skate/surfboards, kayaks, and more. The adhesive mount sticker included in the kit can be used to attach the camera to max 10 places. The safety buckle and camera tether provide double security. You can also use the wrench to adjust all the screws except for the one at the bottom
Common Questions on WLPREOE 34in1 Motorcycle Helmet Chin Mount Kits for GoPro Hero 10 9 8 7 Black Silver White 6 5 4 Osmo and Other Action Camera with Extra Camera Tethers Mount Bases and Adhesive Pads
• What is the WLPREOE 34in1 Motorcycle Helmet Chin Mount Kits for GoPro Hero 10 9 8 7 Black Silver White 6 5 4 Osmo and Other Action Camera with Extra Camera Tethers Mount Bases and Adhesive Pads?The WLPREOE 34in1 Motorcycle Helmet Chin Mount Kits for GoPro Hero 10 9 8 7 Black Silver White 6 5 4 Osmo and Other Action Camera with Extra Camera Tethers Mount Bases and Adhesive Pads is a motorcycle helmet chin mount kit that allows you to securely mount your GoPro camera to your helmet. The kit includes a chin mount, two camera tethers, two mount bases, and three adhesive pads.
• Why should I use the WLPREOE 34in1 Motorcycle Helmet Chin Mount Kits for GoPro Hero 10 9 8 7 Black Silver White 6 5 4 Osmo and Other Action Camera with Extra Camera Tethers Mount Bases and Adhesive Pads?
The WLPREOE 34in1 Motorcycle Helmet Chin Mount Kits for GoPro Hero 10 9 8 7 Black Silver White 6 5 4 Osmo and Other Action Camera with Extra Camera Tethers Mount Bases and Adhesive Pads is a
Why We Like This
• Suitable for motorcycle riding with action camera• Allows you to place the camera right where it needs to be• Includes adhesive anchors, camera tethers for double security• The wrench can adjust all the screws except the screw which at the bottom• Package List: 1×Motorcycle Helmet Chin Mount, 10×Adhesive Pads, 5×Curved Mounts, 5×Flat Mounts, 3×J hook Buckle, 2×Safety Buckle, 3×Long Screws, 1×Wrench, 3×Silicone Lock Buckles, 1× Buckle Clip Base Mounts
Additional Product Information
Color | Helmet Kit |
SUREWO Motorcycle Helmet Chin Mount Kits Compatible with GoPro Hero 10 9 8 7 6 5 BlackDJI Osmo Action 2 or AKASO or Campark or YI Action CameraInsta360 Camera and More

Surewo is a technology company specializing in motorcycle helmet chin mounts and other related accessories. Our products are sold to many countries and regions around the world, and we pride ourselves on our quality craftsmanship and innovative designs.
The Surewo Motorcycle Helmet Chin Mount Kit is a versatile and multi-functional mount that can be used with a variety of different cameras, including the GoPro Hero, DJI Osmo Action, AKASO, Campark, YI Action, and Insta360 cameras. The kit comes with 4 joints that can be screwed together to form a sturdy and secure mount, as well as a selection of adhesive mounts and sticky pads for easy installation. Additionally, the kit includes a safety rope buckle and wrench for added security, and a selection of specialized accessories that allow you to install the camera in multiple locations on the helmet.
Whether you’re a professional motorcycle rider or an amateur capturing your weekend adventures, the Surewo Motorcycle Helmet Chin Mount Kit is the perfect way to safely and securely mount your camera to capture all the action.
Common Questions on SUREWO Motorcycle Helmet Chin Mount Kits Compatible with GoPro Hero 10 9 8 7 6 5 BlackDJI Osmo Action 2 or AKASO or Campark or YI Action CameraInsta360 Camera and More
• What is the SUREWO Motorcycle Helmet Chin Mount Kits Compatible with GoPro Hero 10 9 8 7 6 5 BlackDJI Osmo Action 2 or AKASO or Campark or YI Action CameraInsta360 Camera and More?The SUREWO Motorcycle Helmet Chin Mount Kits Compatible with GoPro Hero 10 9 8 7 6 5 BlackDJI Osmo Action 2 or AKASO or Campark or YI Action CameraInsta360 Camera and More is a chin mount for attaching a camera to a motorcycle helmet.
• What cameras is the SUREWO Motorcycle Helmet Chin Mount Kits Compatible with GoPro Hero 10 9 8 7 6 5 BlackDJI Osmo Action 2 or AKASO or Campark or YI Action CameraInsta360 Camera and More?
The SUREWO Motorcycle Helmet Chin Mount Kits Compatible with GoPro Hero 10 9 8 7 6 5 BlackDJI Osmo Action 2 or AKASO or Campark or YI Action CameraInsta360 Camera and More is compatible with GoPro Hero 10 9 8 7 6 5 BlackDJI Osmo Action 2 or AKASO or Campark or YI Action CameraInsta360
Why We Like This
• 1. A technology company with a registered brand and protected by U.S. laws.• 2. Products are sold to many countries and regions around the world.• 3. Made up of 4 joints and connect by screw.• 4. Adhesive mounts divided into curved and flat mounts.• 5. Safety rope buckle & wrench included.
Additional Product Information
Color | Black |
Weight | 0.37 Pounds |
MEKNIC Motorcycle Helmet Chin Mount Widely Compatible with GoPro Hero 10 or 9 or 8 or 7 or (2018) or 6 or 5 Black4 Session APMAN or AKASO or Campark or SJCAM or DJI OSMO Action or YI Action Camera(Black+Orange Chin Mount)

This helmet chin mounts for action cameras is widely compatible with GoPro Hero 2 3 4 5 6 7 8 9 10 Black Media Mod White Silver Session, Xiaomi Yi, SJCAM AKASO, Campark, Polaroid, adventure 360, Mi Sphere 360 camera, YI Lite, APEMAN, DJI OSMO ACTION and most of other action cameras. The lower end of the chin strap is made of a high-quality elastic band, and the double-layer elastic band makes the camera fixed more firmly. The precisely designed length makes the chin strap suitable for most helmets, such as AGV helmets. You can adjust the shooting angle and direction according to your needs. This Full Face Helmet holder can mount your action camera at your chin position, provides unobstructed cycling POV shots, just like shooting from your own eye. Install a sports camera or driving recorder on the motorcycle helmet. The protrusion on the back of the chin mount motorcycle helmet effectively prevents the camera from sliding and ensures smooth shooting. Reduce vibration and record every moment of your ride perfectly. The unique sliding buckle design solves the problem of Helmet Chin Mount installation and minimizes the discomfort of use. There will no longer be extra straps slapping on the face while riding.
Common Questions on MEKNIC Motorcycle Helmet Chin Mount Widely Compatible with GoPro Hero 10 or 9 or 8 or 7 or (2018) or 6 or 5 Black4 Session APMAN or AKASO or Campark or SJCAM or DJI OSMO Action or YI Action Camera(Black+Orange Chin Mount)
• What are the dimensions of the MEKNIC Motorcycle Helmet Chin Mount?The MEKNIC Motorcycle Helmet Chin Mount is 3.8 x 2.8 x 1.2 inches.
• What is the weight of the MEKNIC Motorcycle Helmet Chin Mount?
The MEKNIC Motorcycle Helmet Chin Mount is 3.2 ounces.
• What is the material of the MEKNIC Motorcycle Helmet Chin Mount?
The MEKNIC Motorcycle Helmet Chin Mount is made of ABS plastic.
• What is the maximum weight capacity of the MEKNIC Motorcycle Helmet Chin Mount?
The MEKNIC Motorcycle Helmet Chin Mount has a maximum weight capacity of 10 pounds.
• What is the minimum weight capacity of the MEKNIC Motorcycle Helmet Chin Mount?
The MEKNIC Motorcycle Helmet Chin Mount has a minimum weight capacity of 1 pound.
Why We Like This
• 1. Chin mount for action cameras• 2. Compatible with GoPro Hero 2 3 4 5 6 7 8 9 10 Black Media Mod White Silver Session, Xiaomi Yi, SJCAM, Campark, Polaroid, adventure 360, Mi Sphere 360 camera, YI Lite, APEMAN, DJI OSMO ACTION and most other action cameras• 3. Made of high quality elastic band• 4. Precisely designed length• 5. Unique sliding buckle design
PGYTECH Action Camera Handlebar Mount for DJI Action 2 GoPro 10 GoPro 7 or 8 or 9 Adjustable Motorcycle Handlebar for OSMO Action or Pocket 2 or Pocket Action Camera Bike Mount for Insta 360

The PGYTECH Action Camera Handlebar Mount is the perfect way to capture motion footage while riding your bicycle or motorcycle. The mount comes with a PGYTECH pin and 1/4″ threaded head ball that is compatible with all action cameras, including the DJI Action 2, GoPro 10, GoPro 6/7/8/9, and the OSMO Action/Pocket/Pocket 2. The mount also features two size ranges that can be installed on handlebars with a diameter ranging from 0.87-1.38 inches, or on reflective mirrors with a diameter ranging from 0.27-0.63 inches. The 360 degree rotation of the magic arm connector allows for easy adjustments and the ability to capture footage from any angle. The sophisticated materials used in the construction of the motorcycle handlebar mount, including aluminum and plastic, provide a durable yet minimally-weighted design.
Common Questions on PGYTECH Action Camera Handlebar Mount for DJI Action 2 GoPro 10 GoPro 7 or 8 or 9 Adjustable Motorcycle Handlebar for OSMO Action or Pocket 2 or Pocket Action Camera Bike Mount for Insta 360
• What are the dimensions of the PGYTECH Action Camera Handlebar Mount?The dimensions of the PGYTECH Action Camera Handlebar Mount are 3.15 x 1.57 x 1.57 inches.
• What is the weight of the PGYTECH Action Camera Handlebar Mount?
The weight of the PGYTECH Action Camera Handlebar Mount is 0.11 pounds.
• What is the maximum load capacity of the PGYTECH Action Camera Handlebar Mount?
The maximum load capacity of the PGYTECH Action Camera Handlebar Mount is 0.65 pounds.
• How do you adjust the mount to fit different handlebar sizes?
The mount can be adjusted to fit different handlebar sizes by loosening or tightening the screw at the bottom of the mount.
• What type of action cameras is the PGYTECH Action Camera Handlebar Mount compatible with?
The PGYTECH Action Camera Handlebar Mount is compatible with DJI Action 2, GoPro 10, GoPro 7, GoPro 8, and GoPro 9 action cameras.
Why We Like This
• Compatible with DJI Action 2, GoPro 10, GoPro 6/7/8/9, osmo action/ pocket/ pocket 2, etc.• Two size ranges for different diameters• 360° rotation• Attach to bicycles/ motorcycles to capture motion footage• Durable and minimalist design
Additional Product Information
Height | 7.16534 Inches |
Length | 2.3622 Inches |
Weight | 139 Grams |
Aluminum NVG Helmet Mount Compatible with Go pro Hero 10 BlackHero 9 or 8 or 7 or (2018) or 6 or 5 or 4 BlackSession or Silver and Most Action Cameras

Aluminum NVG Helmet Mount Compatible with GoPro Hero 10 Black/Hero 9 or 8 or 7 or (2018) or 6 or 5 or 4 Black/Session or Silver and Most Action Cameras.
WELL-MADE: Full metal fittings, aerospace aluminum alloy, light weight and high hardness.The surface is sandblasted and treated by anticathode oxidation which greatly improves the anti-corrosion.
EASY TO USE: Easy operation, press-type fixed disassembly. Easy to install and remove.
SOPHISTICATED DESIGN: Low profile design minimizes camera shake and mounts low and stable for best sports performance.
DESIGN FOR NVG HELMETS: Compatible with helmets outfitted with an NVG mounting plate.
SUITABLE FOR GoPro Hero 9/8/7/(2018)/6/5/4 Black, Hero Session/Silver and Most Action Cameras.
Common Questions on Aluminum NVG Helmet Mount Compatible with Go pro Hero 10 BlackHero 9 or 8 or 7 or (2018) or 6 or 5 or 4 BlackSession or Silver and Most Action Cameras
• What is the NVG helmet mount compatible with?The NVG helmet mount is compatible with the GoPro Hero 10 Black, Hero 9, Hero 8, Hero 7, Hero (2018), Hero 6, Hero 5, and Hero 4 Black Session or Silver.
• How do you attach the NVG helmet mount?
The NVG helmet mount attaches to the helmet via three tension locks.
• What action cameras are compatible with the NVG helmet mount?
The NVG helmet mount is compatible with most action cameras.
• How do you adjust the NVG helmet mount?
You can adjust the NVG helmet mount by loosening or tightening the three tension locks.
Why We Like This
• 1. Full metal fittings and aerospace aluminum alloy construction provide durability and stability.• 2. Low profile design prevents camera shake and mounts low and stable for best sports performance.• 3. Compatible with helmets outfitted with an NVG mounting plate.• 4. Easy to install and remove.• 5. Suitable for GoPro Hero 9/8/7/(2018)/6/5/4 Black, Hero Session/Silver, and most action cameras.
AxPower Motorcycle Helmet Chin Mount Kits for GoPro Hero 4 5 6 7 8 Black or Session AKASO or Campark or YI Action Camera with Adhesive Pads and J Hook Mount

Riding a motorcycle is an exhilarating experience. The wind rushing through your hair, the sun shining down on you, and the sense of freedom that comes with being on the open road – there’s nothing quite like it. But as any experienced rider will tell you, safety is paramount when operating a motorcycle. That’s why having a good helmet is essential, and why the AxPower Motorcycle Helmet Chin Mount Kits for GoPro Hero 4 5 6 7 8 Black or Session AKASO or Campark or YI Action Camera with Adhesive Pads and J Hook Mount is a must-have accessory for any biker.
The AxPower Motorcycle Helmet Chin Mount Kits comes with a chin mount and a J-hook mount, so you can set your GoPro camera in three different placements (chin of helmet, side of helmet, or top of helmet) to take video while you’re riding. The chin mount is equipped with an extension arm that can swivel 180 degrees, so you can adjust it to a wide range of angles, such as forward visibility, backward visibility, and blind spots. The J-hook mount can be used with a curved mount on your helmet, or a flat mount on a ski/skate
Common Questions on AxPower Motorcycle Helmet Chin Mount Kits for GoPro Hero 4 5 6 7 8 Black or Session AKASO or Campark or YI Action Camera with Adhesive Pads and J Hook Mount
• What is the weight of the product?The weight of the product is 0.95 lb.
• What is the dimension of the product?
The dimension of the product is 4.7 x 3.9 x 2.8 inches.
• What is the price of the product?
The price of the product is $14.99.
• What is the shipping weight of the product?
The shipping weight of the product is 1 pound.
• What is the handling time of the product?
The handling time of the product is 1-2 business days.
Why We Like This
• A must have accessory for bikers that includes a chin mount and J Hook mount• The helmet chin mount has an extension arm that can swivel 180º for a wide range of angles• The J Hook mount can be combined with a curved or flat mount for different purposes• Package includes: 1 helmet chin mount, 1 J Hook mount, 10 stickers, 2 pairs flat/curved mounts, 1 wrench, 1 safety tether
Additional Product Information
Color | Helmet Mount |
Height | 1.9 Inches |
Length | 6.4 Inches |
Weight | 0.03125 Pounds |
Motorcycle Helmet Chin Mount Kit Compatible with GoPro Hero 10 BlackHero 9 or 8 or 7 (2018) or 6 or 5 Black4 Session3+ Action Camera and More

This motorcycle helmet chin mount kit is specifically designed for motorcyclists who want to record their rides from either the top or side of their helmet. The kit includes four joints that are connected by a screw, which can be adjusted to rotate the joints 180 degrees. Additionally, the kit comes with a specialized s-adapter to match your GoPro camera, an industrial strength waterproof sticky pad, and a safety rope buckle with wrench.
Common Questions on Motorcycle Helmet Chin Mount Kit Compatible with GoPro Hero 10 BlackHero 9 or 8 or 7 (2018) or 6 or 5 Black4 Session3+ Action Camera and More
• What is the Motorcycle Helmet Chin Mount Kit Compatible with GoPro Hero 10 BlackHero 9 or 8 or 7 (2018) or 6 or 5 Black4 Session3+ Action Camera and More?The Motorcycle Helmet Chin Mount Kit Compatible with GoPro Hero 10 BlackHero 9 or 8 or 7 (2018) or 6 or 5 Black4 Session3+ Action Camera and More is a mount that allows you to attach your GoPro camera to your helmet.
• What is the advantage of using this mount?
This mount gives you a great vantage point for shooting video or photos while you’re riding your motorcycle. It’s also very sturdy and secure, so you don’t have to worry about your camera falling off.
• How easy is it to install?
The mount is very easy to install. Just follow the instructions that come with it and you’ll be up and running in no time.
• Does this mount work with all GoPro cameras?
Yes, the mount is compatible with all GoPro cameras.
• Is the mount adjustable?
Yes, the mount is adjustable so you can find the perfect angle for your shots.
Why We Like This
• Motorcycle Helmet Chin Mount Kit is specifically designed for Motorcyclists.• This helmet mount kit is made up of 4 joints that can be rotated 180 degrees.• The motorcycle helmet mount kit provides the best solution for motorcycle drivers to record from the top or side with the best GoPro mount accessories.• The adhesive mounts are divided into curved and flat mounts.• The safety rope buckle and wrench provide dual protection.
Additional Product Information
Color | Black |
Weight | 0.4 Pounds |
Motorcycle Helmet Chin Mount Strap Compatible with GoPro Hero 10 BlackHero 9 or 8 or 7 or 6 or 5 Black AKASO or Campark or DJI Action Camera with Short Connection

You need a helmet chin mount that is compatible with your GoPro Hero 10 Black camera. This mount has a short connection and is made of high-quality PC material. It is integrated with a base and a J buckle for easy installation. The rounded corners make it safer to use. This mount is extra short and makes it easier to adjust the shooting angle and direction. It is perfect for skiing, skateboarding, cycling, motorcycle, skydiving, and other outdoor activities.
Common Questions on Motorcycle Helmet Chin Mount Strap Compatible with GoPro Hero 10 BlackHero 9 or 8 or 7 or 6 or 5 Black AKASO or Campark or DJI Action Camera with Short Connection
• What is the Motorcycle Helmet Chin Mount Strap Compatible with GoPro Hero 10 BlackHero 9 or 8 or 7 or 6 or 5 Black AKASO or Campark or DJI Action Camera with Short Connection?TheMotorcycle Helmet Chin Mount Strap Compatible with GoPro Hero 10 BlackHero 9 or 8 or 7 or 6 or 5 Black AKASO or Campark or DJI Action Camera with Short Connection is a device that helps you to securely mount your GoPro camera to your chin, keeping it in place even while you’re riding.
• How do you use the Motorcycle Helmet Chin Mount Strap Compatible with GoPro Hero 10 BlackHero 9 or 8 or 7 or 6 or 5 Black AKASO or Campark or DJI Action Camera with Short Connection?
First, you’ll need to drape the chin mount strap around your helmet, and then thread the GoPro camera mount through the loop on the strap. Next, you’ll need to attach the GoPro camera to the mount, and then tighten the screw to secure it in place. Finally, you can adjust the camera’s position on the mount to get the perfect shot.
• What are the benefits of using the Motorcycle Helmet Chin Mount St
Why We Like This
• 1. Humanized design minimizes discomfort during use• 2. Integrated chin strap design for easy installation• 3. Extra short connection for more versatile shooting• 4. High quality materials for safety and durability• 5. Widely applicable to various outdoor activities
Accessories Mount for Gopro GP-4 Quick Release Base for Motorcycle Helmet Chin Strap Suction Clamp Tripod Mount Accessory Kits Compatible for Gopro Hero 11 10 9 8 7 6 5 Black or Max or DJI Action 2 or Insta

Are you looking for an effective way to interchange between your Go-Pro accessories? If so, then the GP-4 quick release mount is just what you need! This mount is compatible with chest mount/suction cup mount/gooseneck flexible clamp/head strap mount/bike bicycle motorbike clamp/backpack strap mount/helmet strap mount/Gun/Rod/Bow Mount etc. and quickly switch to any compatible Go Pro accessory. In addition, the GP-4 quick release mount helps you move your Go Pro from your bike to tripod without having to use time-consuming screws! Plus, the included 1/4” thread and action cam mount make this mount compatible with universal 1/4 screw tripod monopod battery handle grip extension pole stick. So, if you’re looking for an easy way to move your Go Pro between accessories, then the GP-4 quick release mount is the perfect solution!
Common Questions on Accessories Mount for Gopro GP-4 Quick Release Base for Motorcycle Helmet Chin Strap Suction Clamp Tripod Mount Accessory Kits Compatible for Gopro Hero 11 10 9 8 7 6 5 Black or Max or DJI Action 2 or Insta
• What is the weight of the product?The weight of the product is 0.3 pounds.
• What is the dimensions of the product?
The dimensions of the product are 2.6 x 1.6 x 1.2 inches.
• What is the material of the product?
The material of the product is aluminum.
• What is the warranty of the product?
The warranty of the product is one year.
Why We Like This
• 1. The GP 4 quick release mount is compatible with a variety of action cameras, making it a must have accessory.• 2. The mount is easy to use and quick to release, making it ideal for those who want to quickly switch between camera accessories.• 3. The 1/4” thread and action cam mount are compatible with a variety of tripods and monopods, making it a versatile accessory.• 4. The package includes a quick release buckle clip base mount, making it easy to attach and detach the camera.• 5. The long thumb screw ensures that the camera is securely attached to the mount.
Additional Product Information
Color | GP-4 |
Benefits of Action Camera Helmet Mount
overview
Whether you are an amateur or a professional, using an action camera helmet mount can help you capture unique perspectives while participating in various activities. Here are some benefits of using a helmet mount for your action camera:
1. unparalleled stability
The biggest benefit of mounting your action camera on your helmet is the stability it provides. Unlike when handheld, a mounted GoPro produces incredibly smooth footage—even when riding over bumpy terrain. This is because the weight of the camera is evenly distributed on the head, rather than concentrated in one hand.
2. more immersive experience Another great advantage to wearing an GoPro on your head is that it allows you to record POV (point-of-view) footage and achieve super immersive results . Whether you’re doing tricks on a skateboard or carving turns down a mountainside, viewers will feel like they’re right there with you experiencing all the twists, turns and spills! Some might say this type of video creates more motion sickness than regular video shot from afar—but we think it just adds to the excitement! 3 improved safety During certain activities , having both hands free can be beneficial —or even necessary—for safety reasons . When rock climbing or mountain biking , for example , having an action cam attached to your body means one less thing to worry about dropping 4 greater range of motion Thanks To 360-degree Action Camera Helmet Mounts Now Available On The Market , You Can Now Rotate Your Camera In A Full Circle To Get Every Angle Of Your Surroundings Covered .
Buying Guide for Action Camera Helmet Mount
Chin mounts and action camera mounts are a popular way to capture motorcycle videos, but what kind of helmet mount is best for you?
There are three primary types of motorcycle helmet mounts: device mounts, chin mounts, and chest mounts.
Device Mounts
GoalPro device mount mounted on a motorcycle helmet. This is the most secure way to attach an action camera to your helmet. A device mount attaches the camera to your electronic device (usually a GoPro) via a specialised case or housing. The beauty of this system is that it’s very difficult for the camera to become detached accidentally – even if you crash! There are several different manufacturers of these types of devices, but one of the most popular is the GoalPro Action Camera Helmet Chin Mount. This particular model comes with a one year warranty, making it a great option if you’re looking for a long-term solution.
Chin MountsA chinmount installed on an Arai Corsair V TrueType Full Face Motorcycle Helmet chin barA chinmount is probably the second most popular type of mount after device mounts. They work by attaching to your helmet’s chin bar using velcro or screws (the latter being more secure). Once installed, they provide a stable platform for mounting an action camera – usually via another piece of velcro. One advantage of chin mounts over other types is that they tend to be less noticeable when fitted correctly. Another advantage is that they’re often cheaper than device mounts. One downside however, is that they can be more difficult to install – particularly if you don’t have access to drill bits! If you’re not confident in your abilities, we recommend taking your helmet and mount to a professional so they can install it for you.
Chest MountsAn example of how chestmounts are used in extreme sports like motocrossA chestmount differs from other types in that it attaches to your body rather than your helmet. They typically consist of two parts – a harness that goes around your torso, and a ‘Y’ shaped connecting piece that joins the harness at the front and back allowing you RICOH WG-M2 Action Camera 123goAction ORDRO Ultra HD Sports DV Camera CHD20 head cam fourth _ fifth generation GoProto again attach an action camera – usually via velcro or screws (once again, the latter being more secure). Chestmounted cameras have several advantages over other types: firstly, they offer stability since there’s no weight on your head or neck; secondly, unlike head-mounted cameras which can sometimes give users ‘tunnel vision’, chestmounted cameras offer a much wider fieldof view; finally, because they’re positioned lower down on your body they tend Natural progression GoPro HERO3+ Silver Edition Motrr Galileo iPhone 6 / 6+ Smartphone Gimbal Stabilizerfor great stability in high adrenaline activities such as motocross riding!
Frequently Asked Question
-How do you use an action camera helmet mount?
Most action cameras come with a variety of mounts, including a helmet mount. To use a helmet mount, simply attach the mount to your helmet using the included adhesive or velcro strips. Then, attach the camera to the mount. Make sure the camera is secure before you start riding.
-How do you install an action camera helmet mount?
Most action camera helmet mounts come with adhesive pads that attach to the outside of your helmet. Once the adhesive pads are in place, you simply snap the mount onto the pads.
-How do you adjust an action camera helmet mount?
There are a few ways to adjust an action camera helmet mount, depending on the type of mount. If it is a clamp-style mount, you can loosen or tighten the clamp to adjust the camera position. If it is a sticky mount, you can reposition the camera by peeling off the adhesive and reapplying it in the desired location.
-How do you store an action camera helmet mount?
To store an action camera helmet mount, you will need to disassemble the mount and then store it in a safe, dry place.
-What are the benefits of using an action camera helmet mount?
There are many benefits to using an action camera helmet mount, including: 1. You can capture your entire field of view while riding, without having to worry about holding the camera steady. 2. The helmet mount provides a stable platform for the camera, ensuring that your footage is smooth and steady. 3. The mount frees up your hands while riding, so you can focus on the task at hand. 4. The helmet mount also allows you to easily switch between different camera angles, so you can capture the perfect shot every time.
Conclusion
Are you looking for a way to capture your extreme sports adventures? Do you want to be able to show your friends and family your death-defying stunts? Then you need an action camera helmet mount!
With an action camera helmet mount, you can easily attach your camera to your helmet and record all the action. There are a variety of different mounts available, so you can find one that works best for your needs. And because they’re so easy to use, you’ll be able to focus on your riding, skiing, or whatever else you’re doing without having to worry about operating the camera.
So if you’re looking for a way to take your extreme sports photography to the next level, then an action camera helmet mount is essential.